China Injection Molding > News
-
Can JasonMould offer a Low-volume injection molding manufacturing service from china?
- June 24, 2019
- Posted by: ys
- Category: Low Volume Manufacturing
No CommentsNot all JasonMould services are given in large quantities, the company always tries to please the tastes of all its customers. Many people think that different companies are able to offer services in large quantities or only in small ones, because it is the custom to find a company that only dedicates itself to carry
-
Are you willing to know about the plastic injection molding services from china mold maker companies?
- June 24, 2019
- Posted by: ys
- Category: plastic injection molding
Many companies are considering the most recent updates of resources and technologies particularly designed for enhancing their industrial processes in all the possible ways. They focus on loads of significant things with an objective to invest in the injection molding services to make their process easy. They can make contact with the number one china plastic
-
10 Factors Affecting The Quality Of Injection Molds
- June 21, 2019
- Posted by: ys
- Category: Company News
Mold manufacturing is a complicated process. From the steps of design, processing, assembly, debugging, etc., to the final use, there are mainly 10 factors that affect the quality of the mold throughout the lifetime. 1.Steel is the decisive factor in the quality of the mold, and choosing the right steel is the top priority. The
-
WHAT ARE THE EFFECTS OF WALL THICKNESS OF PLASTIC PRODUCTS ON QUALITY
- June 19, 2019
- Posted by: ys
- Category: Company News
The wall thickness of the plastic parts processed by injection moulding has a great influence on the quality. When the wall thickness is too small and the flow resistance is too large, it is difficult for large and complex plastic parts to fill the cavity. The minimum size of the wall thickness processed by plastic
-
What Is A Short Shot In Injection Molding?
- June 17, 2019
- Posted by: ys
- Category: Company News
A short shot is the incomplete filling of a mold cavity which results in the production of an incomplete part. If a part short shots, the plastic does not fill the cavity. The flow freezes off before the flow paths have completely filled. To ensure the finished part is of good quality, the part must
-
HOW TO MAINTAIN AUTOMOTIVE PLASTIC PARTS?
- June 14, 2019
- Posted by: ys
- Category: Company News
Automotive plastic parts are used more and more widely. Automotive plastic parts are not only cheap, but also environmentally friendly, beautiful, convenient and durable. Nowadays more and more automobile metal parts are replaced by plastic parts. In order to ensure the normal operation of various parts, the maintenance and maintenance of automobile plastic parts are
-
Suggestions On The Maintenance Of Injection Molds
- June 12, 2019
- Posted by: ys
- Category: Company News
Compared with other moulds, the structure of injection moulds is more complex and precise , the operation and maintenance of the product requirements are higher, so in the entire production process, the use of positive solutions and careful maintenance, maintenance to maintain the normal production of enterprises, improve the efficiency of enterprises, has a very
-
HOW LONG DOES INJECTION MOLDING TAKE?
- June 10, 2019
- Posted by: ys
- Category: Company News
The main determinant is the total number of products that customers need to produce. It takes about the same time to produce a product. Multiply the time to produce a product by the total amount of production the customer needs to produce to figure out how long it takes. Material and machine preparation time should
-
Welding Line In Plastic Injection Molding Process
- June 6, 2019
- Posted by: ys
- Category: Company News
Weld Lines The flowing defects on product surface or the linear defects that are caused when melt fronts meet each other after splitting. Weld lines refer to the lines that occur on a plastic product surface when the cold slug melts. In areas of mold cavity where the molten plastic meets inserts or holes, areas
-
REQUIREMENTS OF PLASTIC MATERIAL FOR AUTOMOTIVE INJECTION MOLDING PARTS
- June 5, 2019
- Posted by: ys
- Category: Company News
Excellent weather resistance, guaranteeing long-term use without color, aging cracks (including heat and oxygen aging and light aging); Good chemical resistance, to resist the erosion of oil and daily chemicals; Easy moulding, the injection grade material should have enough fluidity to ensure the moulding of complex components and improve production efficiency. Economy requires material with