-
Five Steps Of The Injection Mold Production Process
- June 3, 2019
- Posted by: ys
- Category: Company News
No CommentsWith the continuous development of automotive electronics, higher requirements for product modeling, JasonMould here shares the five steps in the injection molding process. 1. The mold structure design A set of high-quality molds requires not only good processing equipment and skilled mold making workers. Another very important factor is good mold design, especially for complex
-
WHAT FACTORS SHOULD BE CONSIDERED IN THE DESIGN OF PLASTIC INJECTION MOULDS?
- May 29, 2019
- Posted by: ys
- Category: Company News
Injection cost According to the size of the machine, how much per injection, so as to determine the product ranking mode and the number of holes. The more the number of moulds produced, the lower the cost of injection moulding. Because the cost of injection moulding is calculated according to injection order. Product Appearance According
-
Injection mold development cost and how to identify a high quality mold.
- May 27, 2019
- Posted by: ys
- Category: Company News
What is the injection mold? Injection mold is a tool for producing plastic products; it is also a tool for imparting complete structure and precise size of plastic products. Injection molding is a processing method used in mass production of complex parts of certain shapes, specifically refers to plastics that melt by heat from injection
-
WHAT PLASTIC PARTS ARE ON THE CAR?
- May 24, 2019
- Posted by: ys
- Category: Company News
Bumper housing Also known as “bumper”, but in fact it is only the auxiliary shell outside the bumper, not the body of the bumper. Bumper housing plays the role of cushioning and energy absorption, the working environment is relatively complex, and the volume is larger, so it is generally made of polypropylene (PP), because of
-
Requirements for selection of materials for injection molding parts
- May 22, 2019
- Posted by: ys
- Category: Company News
The selection of mold materials is an important issue in mold design and manufacturing, which directly affects the manufacturing process of the mold, the service life of the mold, the molding quality of the plastic parts and the processing cost of the mold. Because of this, domestic and foreign scholars have developed new mold steels
-
Proper Quality Management Extends Tool Service Life
- May 17, 2019
- Posted by: ys
- Category: Company News
In the production process, tools are subject to normal wear and tear. It is certain that quality management control in daily production will play an important role in the assurance of tool quality, which mainly covers the following aspects: Effective data management, including production data, process data and drawing documents: Effective management of production data,
-
Mold flow Analysis Will Help Avoiding Potential Problem In Mold.
- May 10, 2019
- Posted by: ys
- Category: Company News
Over the past years, substantial advancements have been made in injection molding CAEsoftware. What started out as a tool to give designers a general idea of how a simple plastic part will fill, can now accurately analyze packing, cooling, warpage, fiber orientation in any complex part geometry and conditions in the mold. Identifying Problems in the Mold
-
Hot runner system should pay attention to the problem of injection pressure
- May 6, 2019
- Posted by: ys
- Category: Company News
Customers may not be very careful about the use of the hot runner system. Today, We would like to talk to you about the injection pressure when choosing a hot runner system. Injection pressure loss in hot runner systems cannot be ignored. Many hot runner mold users have a misconception that the plastic solution in
-
DIFFICULTIES OF PLASTIC SHELL PROCESSING FOR INJECTION MOLDING
- April 29, 2019
- Posted by: ys
- Category: Company News
The shell of many common items in our life is basically made of plastic, such as mobile phone shell, refrigerator shell, computer shell, air conditioning shell, etc. All of them are produced by injection molding. The shell of a product is also a link that consumers come into contact with the product, regardless of the
-
Common problems and precautions in plastic molds making
- April 26, 2019
- Posted by: ys
- Category: Company News
The production process of a set of plastic molds is not a one-step process. It is necessary to grasp the structural design of the product well, so as to avoid many problems in the subsequent production process, such as shrinking and flashing. So, what issues should you pay attention to when making molds? Don’t just