The cavities in Plastic injection mold is not the more the better, also not all molds can be done with 4 cavities or 8 cavities. So what are the factors affecting the numbers? Let’s have a look below: Relationship between the product size and equipment. When the part belongs to large or medium size, generally

As we all know, the stripe defect in mold is a very serious matter, it will directly affect the accuracy of injection molding, and will also lead to product scrap, so we must pay attention to. So, how can we avoid this defect? Proper design, careful processing, reasonable mold repair and timely nitriding are the

The design of the injection mold was not fully collectively reviewed, and the structure of the injection mold was unreasonable, which caused the injection mold to undergo multiple improvements after the test, which made the injection mold cost exceed the budget. If it can be solved after several improvements, it is relatively fortunate. There are

In order to ensure the normal processing of plastic parts, operators need to understand the cause of the abnormal appearance in this process, the better to avoid the abnormal appearance during processing. Below, JasonMould share you the causes of deformation in processing: During the process of molding, the surplus material is spilled into the gap

The basic reason for surface sag: from the perspective of plastics, when the plastic cools and shrink, insufficient filling will lead to product surface sag or internal cavity. The causes and solutions of defects are different depending on the location of sag. When the sag occurs at the final cooling position of the thick-walled product,