- May 6, 2019
- Posted by: ys
- Category: Company News
Customers may not be very careful about the use of the hot runner system. Today, We would like to talk to you about the injection pressure when choosing a hot runner system.
Injection pressure loss in hot runner systems cannot be ignored.
Many hot runner mold users have a misconception that the plastic solution in the hot runner is always hot, so the hot runner injection pressure loss is much smaller than the cold runner.
In fact, in order to adapt to the needs of hot runner structure design, the flow distance of the solution in the hot runner system will be greatly increased, so the injection pressure loss in the hot runner system cannot be seen.
In practical applications, the injection pressure loss in the hot runner system is too large, which makes the injection molding difficult. Therefore, the flow distance of the plastic (such as PC, POM, etc.) and the solution in the hot runner system is poor.
Large, heavy parts, etc., should use CAE software for flow analysis.
After the production of the hot runner injection mold is completed, the shutdown operation of the injection machine is used, and the following operations must be performed:
First, turn off the heater of the hot runner system.
Second, turn off the cooling system of the mold.
For heated hot runner systems, the mold cooling system must be turned off after the temperature has dropped to 80 °C.
Before the end of the hot runner injection mold production, for high temperature plastics and heat sensitive plastics, refueling must be carried out.
For some plastics such as PCs, it can stay in the hot runner system and the barrel of the injection machine.
At a low temperature of about 160 °C, the injection can be interrupted for up to 12 hours, but it cannot be interrupted for a long time.
Thermal plastics cannot interrupt the injection.
In the barrel of the injection machine and in the flow path of the hot runner, there is a strong adhesion between the cured or semi-cured plastic and the metal surface, even separating the nitride layer.
The screw of the injection machine and the pin of the switch nozzle have a surface nitride layer. Therefore, do not interrupt the injection and perform the melt cleaning before shutting down.
About JasonMould Industrial Company Limited
Jasonmould is a China mold maker of plastic molds- injection mold, die casting moulds, plastic blow molding, rotational molding, medical plastic injection molding, two shot plastic injection molding, insert molding, overmolding, metal injection molding, micro injection molding, powder injection molding, ceramic injection molding, liquid injection molding, husky injection molding, household mold, casting mold, die mold tool, custom molds, china moulds, rapid prototyping tooling, plastic prototyping tooling, punch press tooling, die and tooling for mobile/ cell phone parts, automotive parts, vacuum cleaners, rechargeable tools, telephones, copiers, computers, multimedia speakers, and many other electronic products and household appliances. And also a plastic product manufacturer, mold manufacturer China– plastic parts, plastic water tank, plastic balls, plastic containers, plastic buckle, plastic anchor, plastic hanger, plastic spoon, plastic pipe fitting, plastic tumble, plastic tableware, plastic cups, plastic bottles, plastic tray, plastic cosmetic container, plastic case, plastic food container, plastic chairs, plastic caps, plastic cap closure, plastic tubes, plastic water pipes, plastic knobs, plastic tubing, plastic utility boxes, plastic racks and so on.
Contact:
Person: James Yuan
Company: JasonMould Industrial Company Limited
Add: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China
Tel: 86-752-6682869
Email: james@jasonmolding.com