-
5 Standards Of High-end Injection Mold Factory
- September 18, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
No CommentsInjection mold industry from birth to now, through a number of development stages, into the 21st century, with the development of modern industry, injection mold has become an irreplaceable tool. At the same time, all kinds of large and small injection mold factories have sprung up on the land of China. So how to judge
-
NC PROCESSING FLOW OF INJECTION MOLD
- September 16, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
CNC center has been widely used in the current market. Compared with other machine tools, the mechanical part of CNC center is not different from other lathes, only in the form of control. So how does the CNC machining center work? CNC machining center is also called CNC machine tool. Generally speaking, the sequence
-
What performance is required when using injection mold steel materials?
- September 10, 2019
- Posted by: ys
- Category: Company News
In the process of injection mold processing, the selection of raw materials will play an important role in the overall life of the injection mold and the quality of the plastic products produced. What performance requirements should be achieved when selecting the steel materials for injection molds? Good surface hardness and wear resistance The hardness
-
WHY DO WE CHOOSE INJECTION MOULDS TO PRODUCE PRODUCTS?
- September 6, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
The sustained development of the plastic industry has also promoted the development of the injection mould industry, so why is the injection mould so popular? The following six points are enough for you to have a basic understanding of injection moulds. 1) High accuracy As a highly precise processing method, plastic injection moulding
-
HOW TO SOLVE THE MATTE SURFACE OF PLASTIC INJECTION PARTS?
- September 3, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
Low glossiness means that the surface is dark and dull, and the transparency of transparent products is low. There are many reasons for poor glossiness. Generally, the surface gloss defects of products can be divided into three types: plastic mold failure, improper forming conditions and improper use of raw materials. Injection Mold Failure
-
Causes of flash edges in injection products
- August 29, 2019
- Posted by: ys
- Category: Company News, plastic injection molding
Why do injection products flash? Flash burr may occur during injection molding, which is largely due to the failure of mold or machine clamping force. It affects the quality of the product, we need to understand the cause of flash. Why do injection products flash? The material temperature is too high For low viscosity melt
-
ADVANTAGES AND DISADVANTAGES OF MULTI-CAVITY PLASTIC MOULD
- August 26, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
When we have a project that needs plastic injection parts, the first thing we need to do is to find a plastic mould company to manufacture moulds and parts. But before we start, we need to estimate the cost of injection moulds and plastic moulds roughly and cost control. Here are some cost-saving suggestions for
-
Surface polishing requirements for injection mold parts
- August 24, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
Injection mold is a common mold, polishing quality requirements and products are closely related to the scope of application. Therefore should understand the injection mold parts surface polishing requirements. 1) The inner surface of injection mold parts is usually not polished except for transparent parts. However, knife marks and spark marks are not allowed on
-
JASONMOULD TELLS YOU HOW TO SELECT PLASTIC MOLD SUPPLIERS MATCHING WITH YOURSELF
- August 21, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
When you search for “Plastic Mold Manufacturer” or “Plastic Mold Factory” on Google, you will get a lot of information and contact information about the mould manufacturers. How can you find a suitable supplier in this huge information? JasonMould recommends you send RFQ to five or more suppliers of plastic molds. Then you can compare
-
What to do when heavy smell causes during plastic parts are processed
- August 20, 2019
- Posted by: ys
- Category: plastic injection molding
Use pure resin In many plastic parts, especially in polyvinyl chloride, styrene, polyethyl acetate and acrylate plastics, a small amount of monomer residue will produce unpleasant odors, which can be removed by resin with monomer residue. Change additives The catalyst tertiary amines used in the production of polyurethane foams often produce very weak odors