-
HOW TO SOLVE THE MATTE SURFACE OF PLASTIC INJECTION PARTS?
- September 3, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
No CommentsLow glossiness means that the surface is dark and dull, and the transparency of transparent products is low. There are many reasons for poor glossiness. Generally, the surface gloss defects of products can be divided into three types: plastic mold failure, improper forming conditions and improper use of raw materials. Injection Mold Failure
-
Causes of flash edges in injection products
- August 29, 2019
- Posted by: ys
- Category: Company News, plastic injection molding
Why do injection products flash? Flash burr may occur during injection molding, which is largely due to the failure of mold or machine clamping force. It affects the quality of the product, we need to understand the cause of flash. Why do injection products flash? The material temperature is too high For low viscosity melt
-
ADVANTAGES AND DISADVANTAGES OF MULTI-CAVITY PLASTIC MOULD
- August 26, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
When we have a project that needs plastic injection parts, the first thing we need to do is to find a plastic mould company to manufacture moulds and parts. But before we start, we need to estimate the cost of injection moulds and plastic moulds roughly and cost control. Here are some cost-saving suggestions for
-
Surface polishing requirements for injection mold parts
- August 24, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
Injection mold is a common mold, polishing quality requirements and products are closely related to the scope of application. Therefore should understand the injection mold parts surface polishing requirements. 1) The inner surface of injection mold parts is usually not polished except for transparent parts. However, knife marks and spark marks are not allowed on
-
JASONMOULD TELLS YOU HOW TO SELECT PLASTIC MOLD SUPPLIERS MATCHING WITH YOURSELF
- August 21, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
When you search for “Plastic Mold Manufacturer” or “Plastic Mold Factory” on Google, you will get a lot of information and contact information about the mould manufacturers. How can you find a suitable supplier in this huge information? JasonMould recommends you send RFQ to five or more suppliers of plastic molds. Then you can compare
-
What to do when heavy smell causes during plastic parts are processed
- August 20, 2019
- Posted by: ys
- Category: plastic injection molding
Use pure resin In many plastic parts, especially in polyvinyl chloride, styrene, polyethyl acetate and acrylate plastics, a small amount of monomer residue will produce unpleasant odors, which can be removed by resin with monomer residue. Change additives The catalyst tertiary amines used in the production of polyurethane foams often produce very weak odors
-
WHAT IS THE ROLE OF FLOW ANALYSIS IN INJECTION MOULDS?
- August 16, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
In the process of mould making, it is very important and difficult to find the position of flow balance in the design of runner. In the past, it is often necessary to design runners through past experience to achieve the goal of flow balance, so it needs continuous practice to find solutions, which will lead to
-
How to choose injection molding tools?
- August 14, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
There are tens of millions of plastic products, which require different injection molds to meet their production needs. Between the designer’s design philosophy and design habits, it is difficult to find two identical injection molding machine molds in actual production. However, there is no difference between the molds, no matter how big the differences between
-
WHY IS INJECTION MOULDING SO POPULAR IN THE MANUFACTURE OF PLASTIC PRODUCTS?
- August 12, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
If one part of your machine or equipment does not work properly, you need to order a new part for replacement. However, if your equipment is customized, you must produce or purchase customized components. However, this process takes a long time, depending on the difficulty of manufacturing parts and the type of materials used. However,
-
What is the difference between precision molds and ordinary molds?
- August 9, 2019
- Posted by: ys
- Category: Low Volume Manufacturing, plastic injection molding
What is the difference between precision molds and ordinary molds? What should we pay attention to in design? First of all, the critical dimensions of many precision molds are not allowed to have a slope, but the molds are usually made to take full advantage of the tolerance belt plus a small slope, such as