-
SPI Mold Standard–Wall Thickness Design
- November 22, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
No CommentsProduct structure is undoubtedly the key factor to determine the price of the mold, the realization of a product function has a variety of different design, different design determines the mold manufacturing method is not the same, determine the price of the mold will be different, some structure only need us to pay attention to
-
CHARACTERISTICS AND INJECTION PROCESS OF PC + ABS INJECTION MATERIAL
- November 20, 2019
- Posted by: ys
- Category: plastic injection molding
What is PC + ABS material? PC plastic is a new type of thermoplastic with 90% transparency, so it is called transparent metal. It is very hard, with high impact strength and high dimensional stability, as well as a wide range of application temperature, good electrical insulation, heat resistance and non-toxic properties ABS is a
-
Key Points Of Boss Design
- November 18, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
Screw post is also called boss, which is a feature of most products. What key points should we pay attention to when designing the structure? Let’s have a look: The wall thickness of the boss, at the time of structure design, we need to consider the strength of the boss, so as far as possible
-
HOW TO CHOOSE INJECTION MOLD STEEL?
- November 15, 2019
- Posted by: ys
- Category: Low Volume Manufacturing, plastic injection molding
How to choose the injection mold steel reasonably is a complex project, and it is also the key link of the injection mold manufacturing. This is an important work related to the service life of the mold and the cost of the injection mold. Generally, the materials used to make plastic injection mold need to
-
The reason bubble caused in plastic product of injection molding
- November 11, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
How should plastic product appear bubble to do? Our engineer’s answer is that the reason may in the equipment, plastic mold, and may also in the injection process, the following is the reason analysis of the process, hope to help you solve the problem. The back pressure of screw pre-molding is too low and the
-
5 BENEFITS OF CUSTOM INJECTION MOLDING
- November 8, 2019
- Posted by: ys
- Category: Company News, Low Volume Manufacturing, plastic injection molding
If you need to mass produce the same plastic product, injection molding is your first choice. This low-cost process can produce high-quality parts in large quantities. But do you know the material and process of injection molding? JasonMould takes you to the next 5 options for custom injection molding benefits. 1. Product customization: change to
-
How to tell the difference between PP and POM material?
- November 6, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
In recent years, more and more kinds of plastic products come into our life, at the same time the development of injection molding technology get injection molding products replace other material life and industrial supplies, now almost all things are linked with injection molding parts. So how to distinguish injection plastic material is also a
-
BASIC REQUIREMENTS FOR DESIGN AND MANUFACTURE OF AUTOMOBILE MOULD
- November 1, 2019
- Posted by: ys
- Category: Company News, Low Volume Manufacturing, plastic injection molding
-
Analysis And Solution Of Cracking In Injection Molding
- October 25, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
Cracks, including filament cracks, microcrack, whitening, cracking on the surface of parts, as well as cracks and fracture time due to component adhesion, flow path adhesion or traumatic damage. The main reasons are as follows: Processing: (1) Excessive processing pressure, too fast, the more filling materials, injection, holding pressure for too long, will cause excessive
-
CLASSIFICATION OF INJECTION MOLD
- October 23, 2019
- Posted by: ys
- Category: additive manufacturing, Company News, Low Volume Manufacturing, plastic injection molding, Rapid Prototyping Service
All kinds of tools used in our daily production and life, from the body shell to the head screw, button and the shell of all kinds of household appliances, have an inseparable relationship with the mold. The shape of the mold determines the shape of these products. The processing accuracy and quality of the mould