Some plastic parts after demoulding, have swelling or bubbling on the back of metal insert or in the extra thick parts. This is due to the expansion of the released gas under the action of internal pressure on the plastic which has not been completely cooled and hardened. JasonMould works with you for details. Solutions:

We often see all kinds of patterns and Numbers on plastic pieces, and these Numbers are different. How to carve these Numbers and patterns on these molds, we have these kinds of common methods. The first is directly through the engraving machine engraved on the mold. This is usually used when the font or pattern

Many customers need injection molding after a product is newly designed. When a new product needs tool making, what information should the customer provide to the manufacturer? JasonMould share you a general idea of what is required for tool making and injection molding. 3D CAD file of product. Bill of material ( including materials required

The main reasons for insufficient filling are as follows: 1) insufficient resin capacity. 2) insufficient pressure in the cavity. 3) resin fluidity is insufficient. 4) poor exhaust effect. As an improvement measure, we can start from the following aspects: 1) lengthen the injection time to prevent the resin countercurrent before the gate solidification due to

Injection molding is a processing method used in mass production of complex parts. Specific principle refers to: heat melting plastic raw materials by injection molding machine screw into the mold cavity, after cooling and curing, plastic forming products. The plastic mold consists of two parts: moving mold and fixed mold. The moving mold is installed

Defects in most injection molding products are caused during the plasticizing and injection phases of the injection molding parts, but are sometimes related to design irrationality, including the type of injection port, the number of mold cavities, location and size, the design of the cold and hot runner system, and the structure of the product